SPS Series Encoder Programming Software

Everything needed to configure and maintain your SPS system

The WaveWare Paging Encoder Setup Software allows you to configure and test your WaveWare paging system, as well as perform range testing.

  • Pager Families: Allows the configuration of pager: cap codes, ID's, baud rate, function bit, and pager type (Alphanumeric, Numeric, etc.).

  • Group Paging: Allows the setup of group ID's and the listing of pager ID's associated with the group.

  • Canned Msgs: Allows the configuration of a list of messages associated with a message number (1-15).

  • Settings: Allows the configuration of the port settings, paging communications protocol and advanced features.

  • Program/Read Encoder: Programs/Reads the encoder with the latest/current configuration.

  • Test Encoder: Allows the testing of a system and pagers using the programmed configuration, and it offers a range test feature for doing a site survey.

  • Lookup ID: Checks for an existing pager ID in the database and gives a response displaying the configuration of the selected pager.

Screen Shot 2020-02-26 at 9.56.41 AM.png

For SPS v8 & v9 systems.

Compatible with Windows 8, 8.1 & 10 only.

Capture.PNG

For SPS-5 v9 systems only.

Compatible with Windows 95, 98, 98se, Me, 2000, XP, Vista, & 7.

Screen Shot 2020-01-20 at 9.54.26 AM.png

For SPS-5 v8 systems only.

Compatible with Windows 95, 98, 98se, Me, 2000, XP, Vista, & 7.

Screen Shot 2020-01-20 at 10.09.24 AM.png

For SPS-5 v7 systems only.

Compatible with Windows 95, 98, 98se, Me, 2000, XP, Vista, & 7.

Screen Shot 2020-01-20 at 10.25.05 AM.png

For SPS-5 v6 systems only.

Compatible with Windows 95, 98, 98se, Me, 2000, XP, Vista, & 7.

Looking for something else? Contact us!

 

ENHANCING MOBILE ALERT RESPONSE SINCE 1997